In modern life, people are increasingly inclined to choose wallpaper for home decoration, not only because of its rich colors and diverse forms, but also because it can be changed frequently and can create different home atmospheres at any time; Wallpaper construction is not an easy task. Let me explain that brushes are one of the main construction tools. During the construction process, there are some requirements and taboos to pay attention to when using brushes.

1. Because wallpaper itself absorbs water, the glue should be formulated in a thick manner to reduce its fluidity and increase adhesion, and directly applied to the wall.

2. Do not use a hard scraper or nylon brush. Instead, use a soft bristled brush to gently press down from top to bottom and apply wallpaper to the wall.

3. Keep your hands clean, be careful when applying glue, and do not contaminate the surface of the wallpaper. If glue spills, immediately use a sponge to remove it.

4. Before pasting, a section of double-sided tape should be applied to the edge of the wallpaper to extend its width and prevent contamination from the adhesive.

5. If the surface of the wallpaper is contaminated, only one unit can be cut off according to the width of the contaminated area.

6. Gently drive out the bubbles with a brush, without applying too much force, to avoid damaging the fabric of the wall cloth, especially when pasting yarn wall cloth, as its surface is fragile, special care should be taken.

7. Avoid overlapping and cutting the wall fabric at the shaded corners, and do not cut the wall fabric at the exposed corners to avoid causing the edges of the wall fabric to curl.

8. If there is dust on the surface, it should be lightly brushed with a soft bristled brush or duster, and never wiped with a damp towel to avoid spreading the stain.