Paint brush is a tool we often use when using paint. After use, many people don't know how to clean the paint brush. Do you know how to clean the paint brush? Here is the relevant content on how to wash paint brushes that the editor has compiled for you. I hope it will be useful to you!

Method 1: Solvent

1. Brush the wiping cloth or paper to the maximum extent to eliminate excess paint. This greatly facilitates the task of washing hands.

2. Clean the brush in a solvent, pour it into a bowl or jar, and release it from the paint as soon as it is brushed. Additionally, you can also press down on the edge and the wall of the can.

Here are some types of solvents:

Oil based coatings using mineral oil.

Use water-based coatings: acrylic, watercolor, latex paint; The wood with the whitest glue and adhesive.

Use modified alcohol for cordyceps.

Read the information on the label if you don't know what kind of paint to use.

3. Again, brush off any remaining solvent. When the solvent is water, you can skip this step.

4. Rinse the tap water brush, you can use your fingers to wipe it like this, but be careful with the sable fur brush.

5. When brushed clean, completely eliminate excess moisture from it. Feed the brush with a table, then place it in a storage container until the brush shape and tip do not deform until it dries.

Method 2: Air conditioning brush

1. Wipe off excess paint from brushing. Wipe off excess paint from cloth or paper.

2. Mix 4 liters of water and half a cup of warm water fabric softener. This solution helps alleviate the grip of paint on the brush.

3. A paintbrush in a solution. Do this for a few seconds until the paint you see starts to drop.

4. Shake off excess air conditioning with a brush.

5. Brush the correct shape and dry normally.

Method 3: Vinegar

This eliminates the need for hardened and dirty paintbrushes.

1. Soak and brush in vinegar for an hour. Check if the hair has softened. If not, continue soaking for another hour.

2. Put the brush in the pot and pour in aged vinegar. He must completely cover the bristles.

3. Boil dilute vinegar. Put the brush in and cook for a few minutes.

4. Pick up the brush and let it cool. Be careful, because first of all it will be very hot.

5. You can do this yourself or use an old flat comb with a bristle brush. Based on the bristles of the brush, comb through the loose powder brush pieces that have been knocked over. Repeat until all parts of the paint are brushed off.

6. Rinse the brush. When a large amount of paint is rinsed under running water to thoroughly remove its residual force from the paintbrush.

7. If necessary, repeat the above steps. You may need to brush the vinegar and comb it to recover.

8. Dry brush, vertically placed in a container, with the correct form of bristles.

Method 4: Dishwashing liquid (paint)

1. Squeeze out as many brushes as possible and draw on tissues or cloth.

2. Squeeze dishwashing detergent into your hand.

3. Open warm water. Short term trend rotation brush hands. Rinse and repeat until clean, and there are still traces of paint. You will need at least three repetitions.

4. Dry the water pressure on the brush head, as it may fall out and the handle may crack and warp. Alternatively, you can clean the paint brush with solvent every few months to make it cleaner.

If you use acrylic (latex) paint, you can use acetone (nail polish to remove water) to restore the dry brush. Just soak in acetone for a few minutes, then use soap and water. Repeat until the brush is soft and clean. Stray damaged bristles can be removed with tweezers.

If you are using latex paint (water-based), saturated colors (such as dark green, black, etc.), you will find that cleaning them will have "dirty" bristles if they are still full of paint. Actually, this is because things are like this! To solve this problem, the paint used for cleaning and brushing mineral oil essence to remove oily components.

Do not let the hair go down or store it in water. On the contrary, the tip of the wrapped tissue and the brush are dried in a horizontal position. When wearing bristles, the brush is dry to form the correct shape for future use.

Hot water can straighten the bristles of nylon and polyester brushes. After holding the curved brush in hot water for 60 seconds, you should see the bristles straighten out. After cooling, quickly brush with cold water to fix the bristles in the correct position. This process does not comply with Chinese brushes.

If you are in the art of daily oil use, you may find that the daily cleaning in your hands is too tedious. I just tried to package his handbag and close it with its zipper. Leaving the brush in the solvent does not shorten its service life for a long time.

warn

Even if turpentine is used for the paint, the white spirit is preferred for brushing and washing. It is less toxic. Don't forget to wash your hands after washing them.